Professional fiber optic cabling

Fiber optic cables & FO cables for professional networks

Choose FO patch cables in OS2, OM3, or OM4, as well as pre-terminated universal cables for clearly defined installation paths. The fiber type, connector, polish, and fiber count must match the existing infrastructure and the planned application.

Select FO patch cables Read the detailed selection guide

Go directly to the appropriate product group

The most important fiber types are listed separately. This ensures you only compare products that are technically suitable for your planned route.

• FO patch cable OS2

  Singlemode patch cables with 9/125 µm for matching OS2 infrastructures; available in the assortment with LC and SC connectors as well as UPC and APC polishes.

  View OS2 patch cables

• FO patch cable OM3

  Multimode patch cables with 50/125 µm for existing OM3 connections in local networks, technical rooms, and distribution boards.

  View OM3 patch cables

• FO patch cable OM4

  Multimode patch cables with 50/125 µm for performance-oriented building networks and data center environments with existing OM4 technology.

  View OM4 patch cables

• Pre-terminated FO cables

  Ready-to-connect universal cables for indoor and outdoor use with LC connectors, pulling aid, and connector protection during transport and installation.

  View pre-terminated cables

Show selection aid, project service, and frequently asked questions

Selecting FO cables in a nutshell

Criterion	Selection	What to look out for?
Fiber type	OS2, OM3, or OM4	OS2 is singlemode; OM3 and OM4 are multimode. Fiber type and active components must match.
Connector	LC or SC	Check the existing couplings, patch panels, and devices at both ends.
Polish	UPC or APC	Do not connect UPC and APC directly to each other; APC is usually marked in green.
Design	Duplex or multi-fiber universal cable	Duplex patch cables are suitable for device connections; universal cables can be useful for prepared cable routes.

Standard product or project-specific assembly?

In addition to shop products, abatec offers project-specific fiber optic assemblies. For coordination, the fiber type, fiber count, connector, polish, length, and operating environment are particularly relevant.

Custom fiber optic cable assembly according to project requirements

Supplementary solutions for fiber optic installation

• FO modules and splice boxes
• MTP/MPO cable systems for multi-fiber and high-density applications
• Fiber optic conduit systems for protected cable routing
• Request technical advice on FO components

Frequently asked questions about fiber optic cables

What is the difference between OS2, OM3, and OM4?

OS2 refers to singlemode fibers with 9/125 µm. OM3 and OM4 are multimode fibers with 50/125 µm. Which variant is suitable depends on factors such as the route, active components, and existing infrastructure.

Can UPC and APC connectors be connected to each other?

A direct connection is not intended because the end-face geometries differ. Check the connectors and couplings on both sides; APC connections are usually marked in green.

When is a pre-terminated universal cable useful?

If a multi-fiber route is to be prepared without on-site termination or splicing, a cable with pre-mounted connectors, a pulling aid, and connector protection can simplify the installation process.

What information does abatec need for a custom assembly?

Information on fiber type, fiber count, connectors and polish, cable length, jacket or operating environment, pinout, and quantity required is helpful.